noraplan mega al ESD Protection Control Rubber Flooring See specification below. A. 10 Colors Article 100/200 3 Colors Article 296* A-1. 1576 Spruce A-2. 1579 Desert Flower A-3. 1581* Mother of Pearl A-4. 1583 Rain Forest A-5. 1585 Blue Marble A-6. 1587 Desert Cliff A-7. 1587 Morning Mist A-8. 1834 Crushed Ice A-9. 1836 White Coral A-10. 1837 Green Parrot A-11. 1872* White/Blue A-12. 1873* White/Beige For technical reasons, all colors shown in this program may not correspond exactly to the original shades. Static Dissipative Resistant to Most Oils and Grease Commercial Traffic Five Year Wear Warranty Five Year Conductivity Warranty Article 291 Tiles: ~61 cm x 61 cm/~24" x 24" Article 191 Roll size: ~15.0 m x 1.22 m/~49.2' x 48" *Article 296 Tiles: ~61.5 cm x 61.5 cm/~24.2" x 24.2" Thickness: ~2.0 mm/~.08" • Extremely wear resistant. • Static generation less than 20 volts per AATCC 134. • Easy to maintain. • Never needs conductive wax. • Chemical resistance. • Hot solder resistance. noraplan stone al ESD Protection Control Rubber Flooring See specification below. B. 6 Colors B-1. 1150 Agate Grey B-2. 1146 Granite B-3. 1276 Quartz B-4. 1853 White Mist B-5. 1361 Moonstone B-6. 1279 Ocean For technical reasons, all colors shown in this program may not correspond exactly to the original shades. Static Dissipative Resistant to Most Oils and Grease Commercial Traffic Five Year Wear Warranty Five Year Conductivity Warranty Article 229 Tiles: ~61 cm x 61 cm/~24" x 24" Article 129 Roll size: ~15.0 m x 1.22 m/~49.2' x 48" • Extremely wear resistant. • A new textured surface with a sprinkled pattern. • Static generation less than 20 volts per AATCC 134. • Never needs conductive wax. • Easy to maintain. • Chemical resistance. • Hot solder resistance. PART 2 - PRODUCTS 2.01 ACCEPTABLE MANUFACTURER A. Provide resilient flooring by Freudenberg Building Systems Inc. - Nora Rubber Flooring, 94 Glenn Street, Lawrence, MA 01843; telephone 800-332-NORA, or 978-689-0530; fax 978-975-0110; internet http://www.norarubber.com. 2.02 RESILIENT TILE FLOORING NTS: SELECT 2.02E FOR CLEAN ROOMS, ELECTRONIC MANUFACTURING E. Rubber Tile for ESD Protection Control: Commercial Traffic 1. Product Name: Noraplan Mega Al, Article 200, ESD control, static dissipative, oil- and grease-resistant, smooth surface, 2.0 mm (0.08 inches) thickness, 61 cm by 61 cm (24 inches by 24 inches) tile size. Rubber content approximately 36% (NBR). 1. Product Name: Noraplan Stone Al, Article 229, ESD control, static dissipative, oil- and grease-resistant, smooth surface, 2.0 mm (0.08 inches) thickness, 61 cm by 61 cm (24 inches by 24 inches) tile size. Rubber content approximately 36% (NBR). 2. Material: Nora Rubber free from reground rubber, coarse fillers. 3. Back of Tile: Smooth, sanded back. 4. Wear Warranty/Conductivity Warranty: 5 year wear warranty; 5 year conductivity warranty. 5. Standard: ASTM F 1344-93, for solid color homogeneous tiles and through-mottled tiles as applicable. 6. Abrasion Resistance: Taber abrasion test, ASTM C 501, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater than the following: Noraplan Stone Al, .60; Noraplan Plus Al .70. 7. Hardness: ASTM D 2240, Shore A, not less than 85. 8. Slip Resistance: Static coefficient of friction (James Test): ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance. 9. Flammability: ASTM E 648; NFPA 253; NBSIR 75-950 result to be not less than 0.45 watts per square centimeter, Class 1. 10. Smoke Density: ASTM E 662, NFPA 258, NBS smoke density, less than 450. 11. Burn Resistance: Cigarette and solder burn resistance. 12. Halogen-Free: Products shall contain no halogens. 13. PVC-Free: Products shall contain no poly-vinyl-chloride. 14. Asbestos-Free: Products shall contain no asbestos. 15. Conductivity: 106 - less than or equal to 109 for Noraplan Plus Al, Stone Al when tested according to NFPA-99/ESD-S7.1-1994. 16. Decay Time: <.25 seconds for Noraplan Plus Al, Noraplan Stone Al when tested according to FTM 4046-101. 17. Static Generation: <20 volts when tested according to AATCC-134. 18. Color: As selected. NTS: SELECT 2.02F FOR TILE FOR ACCESS FLOOR PANELS F. Rubber Tile for Access Floor Panels: 1. Product Name: Noraplan stone al, slightly textured surface, static dissipative, tile size untrimmed 610 mm by 610 mm (24 inches by 24 inches), characteristics as specified under E. 1. Product Name: Noraplan mega al, smooth surface, static dissipative, tile size untrimmed 615 mm by 615 mm (24.2 inches by 24.2 inches), characteristics as specified under E. 2. Color: As selected. 2.03 RESILIENT SHEET FLOORING NTS: SELECT 2.03B ESD SHEET FOR CLEAN ROOMS, ELECTRONIC MANUFACTURING, ETC. B. Rubber Sheet for ESD Protection Control: 1. Product Name: Noraplan Mega Al, Article 100, ESD control, static dissipative, oil- and grease-resistant, 2.0 mm (0.08 inches) thickness, 15.0 m by 1.22 m (49.2 feet by 48 inches) roll size. Rubber content approximately 36% (NBR). 1. Product Name: Noraplan Stone Al, Article 129, ESD control, static dissipative, oil- and grease-resistant, 2.0 mm (0.08 inches) thickness, 15.0 m by 1.22 m (49.2 feet by 48 inches) roll size. Rubber content approximately 36% (NBR). 2. Material: Nora Rubber free from reground rubber, coarse fillers. 3. Wear Warranty/Conductivity Warranty: 5 year wear warranty; 5 year conductivity warranty. 4. Abrasion Resistance: Taber abrasion test, ASTM C 501, H-18 wheel, 500 gram load, 1000 cycles, gram weight loss not greater than 0.60. 5. Hardness: ASTM D 2240, Shore A, equal to or greater than 85. 6. Slip Resistance: Static coefficient of friction (James Test): ASTM D 2047, equal to or greater than 0.6, ADA guidelines compliance. 7. Flammability: ASTM E 648; NFPA 253; NBSIR 75-950 result to be not less than 0.45 watts per square centimeter, Class 1. 8. Smoke Density: ASTM E 662, NFPA 258, NBS smoke density, less than 450. 9. Burn Resistance: Cigarette and solder burn resistance. 10. Halogen-Free: Products shall contain no halogens. 11. PVC-Free: Products shall contain no poly-vinyl-chloride. 12. Asbestos-Free: Products shall contain no asbestos. 13. Conductivity: 106 - less than or equal to 109 for Noraplan Plus Al and Noraplan Stone Al when tested according to NFPA-99/ESD-S7.1-1994. 14. Decay Time: .25 seconds for Noraplan Plus Al and Noraplan Stone when tested according to FTM 4046-101. 15. Static Generation: 20 volts when tested according to AATCC-134. 16. Color: As selected.