NORAPLAN FLOORING SYSTEMS
Maintenance Recommendations
Noraplan floor coverings are made of 100% Nora rubber. All Noraplan floor coverings allow for traditional maintenance procedures and provide slip resistance and exceptional wearability. Noraplan flooring does not need waxes or coatings which eliminates the dressing/stripping/dressing cycle necessary with other floor coverings.
To better serve our customers, we have combined efforts with manufacturers that specialize in maintenance equipment and cleaning materials for rubber floor coverings. Freudenberg Building Systems, Inc. has been working with TASKI for over 15 years. Lever Industrial's TASKI products, both chemical and mechanical, have maintained millions of square feet of Nora flooring. We suggest contacting a local TASKI distributor or Lever Industrial 1-800-827-5487 for special assistance or additional maintenance recommendations and/or products.
Initial Cleaning
After finishing interior building construction, floor coverings are generally subject to thorough cleaning. After initial cleaning, regular maintenance can be performed.
Equipment and Chemicals
1. Totally sweep or vacuum area to be cleaned.
2. Apply diluted "Profi" (4 oz./gal.) to area.
3. Let solution act for 15-20 minutes.Important: Do not allow solution to dry.
4. Scrub area with a single disc machine and soft nylon brush or blue pad.
5. Remove (wet vacuum) residue.
6. Rinse with clear water and remove.
7. Allow floor to thoroughly dry (1-4 hours).
8. Polish floor with single disc machine and a soft nylon brush or white pad. Do not heel machine.
Comments
- For stairs and small areas, use special equipment which is available from Lever Industrial 1-800-827-5487.
- For larger surfaces, use same procedures with an automatic scrubber.
- Initial cleaning should not be performed within the first 72 hours after installation.
Regular Maintenance
Equipment and Chemicals
Method 1
Method 3
For customers who prefer a buffable wax dressing or want a higher sheen, use TASKI Ultra/Ultra Spray Maintenance System.
A single disk buffing machine up to 1500 r.p.m. can be used. See your TASKI distributor or call 1-800-827-5487.
Method 4
For customers who prefer a spray-buff system, use TASKI's "Brilliant/P-44" System. See your TASKI distributor or call 1-800-827-5487.
Method 5
For customers who prefer no buffing, and or a satin sheen, use TASKI's OMBRA Floor Finish. See your TASKI distributor or call 1-800-827-5487.
Special Maintenance Procedures Most stains can be removed with common solvents. Cigarette or tar residue can be removed with a tar remover or lighter fluid and a nylon scouring pad. Remove all cleaning solvents.
Method 2
For customers who prefer a higher sheen, use TASKI WiWax cleaner System. See your TASKI distributor or call 1-800-827-5487.
